Volvo 11173952 Aftermarket Kit & High-Efficiency Hydraulic Pump & Fan Motor | OEM-Spec

Volvo 11173952 Aftermarket Kit & High-Efficiency Hydraulic Pump & Fan Motor | OEM-Spec

Volvo 11173952 Aftermarket Kit & High-Efficiency Hydraulic Pump & Fan Motor/OEM-Spec is a combination of high-efficiency alternative accessories tailored for Volvo equipment. As a solution strictly adhering to the original factory standards, the Volvo 11173952 kit, with "efficient power + precise heat dissipation" at its core, is perfectly compatible with the corresponding Volvo models. This Aftermarket Kit includes a hydraulic pump, a fan motor and matching components. Among them, the 11173952 pump provides strong power for the hydraulic system, and the 11173952 motor drives the fan for efficient heat dissipation. The two work together to achieve a "low energy consumption and high output" operating state of the equipment.

1. Efficient power transmission and better energy consumption: The core advantage of the Volvo 11173952 kit lies in its high-performance design - the 11173952 pump adopts a spiral plunger structure, with a hydraulic energy conversion efficiency of 92% (higher than the industry average of 85%), reducing energy consumption by 10% when outputting the same amount of power. The variable frequency drive technology with 11173952 motor can automatically adjust the speed according to the equipment load, avoiding unnecessary energy consumption. This Aftermarket Kit, through the intelligent linkage of power and heat dissipation, enables the device to maintain efficient operation even under heavy load conditions.
2. Oem-level adaptation, compatibility upon installation: The Volvo 11173952 kit is manufactured based on the original factory drawings, with all component dimensions and interface parameters completely replicated. The installation holes and oil circuit interfaces of the 11173952 pump are seamlessly integrated with the hydraulic system of the equipment. The electrical interfaces and fixed structures of the 11173952 motor are consistent with the original factory parts and can be directly installed without modification. As a professional Aftermarket Kit, it addresses the pain points of common alternatives such as "difficult adaptation and need for debugging", and can be put into use immediately after installation.

• 11173952 pump: As the "power core" of the hydraulic system, it can stably output a working pressure of 35MPa, with a flow accuracy controlled within ±1.2% (the original factory standard is ±2%). The built-in pressure sensor can monitor the system pressure in real time and send a signal to the 11173952 motor - when the pressure rises (the load increases), it triggers the motor to accelerate and dissipate heat, forming a linkage mechanism of "power output - enhanced heat dissipation".
• motor 11173952: Equipped with an intelligent temperature control module, it can automatically adjust the fan speed (1500-3000r/min) according to the hydraulic oil temperature (65-80℃ range). When the 11173952 pump is operating at high load, it can synchronously increase the rotational speed to the maximum gear and keep the oil temperature within a safe range. It automatically slows down at low load to reduce energy consumption.
• Accessory parts (included in Aftermarket Kit) : It includes key accessories such as high-pressure seals and dust-proof bearings. The seal is compatible with the working pressure of 11173952 pump and can withstand an instantaneous impact of 40MPa without leakage. Dust-proof bearings provide IP67-level protection for the 11173952 motor, extending the motor's service life.

Heavy load operation in construction: During the earthwork excavation of a Volvo excavator of a certain construction company, due to the decline in the efficiency of the original hydraulic pump and insufficient heat dissipation, the problem of "weak power and easy overheating" occurred. After replacing the Volvo 11173952 kit, the efficient power of the 11173952 pump increased the digging force by 15%, and the intelligent heat dissipation of the 11173952 motor extended the continuous operation time by 2 hours, increasing the daily construction volume by 30%.

Maintenance of logistics port equipment: Volvo loaders in ports need to frequently load and unload goods, and thus have extremely high requirements for the stability of their parts. After adopting the Volvo 11173952 kit, the stable output of the 11173952 pump has avoided the problem of "speed drop", and the low-noise design of the 11173952 motor (operating noise ≤68dB) has improved the operating environment. This Aftermarket Kit has reduced the equipment failure and downtime rate by 60% and cut maintenance costs by 40%.

Hot Tags: volvo 11173952 aftermarket kit & high-efficiency hydraulic pump & fan motor | oem-spec, China volvo 11173952 aftermarket kit & high-efficiency hydraulic pump & fan motor | oem-spec manufacturers, suppliers, cat vq, Volvo 15020161 Alternative Hydraulic Fan Motor