HITACHI HMGC Hydraulic Travel Motor HMGC16/32/48 TRAVEL Parts For Repair Maintain
video

HITACHI HMGC Hydraulic Travel Motor HMGC16/32/48 TRAVEL Parts For Repair Maintain

Complete Rebuild Kit for Hitachi HMGC16, 32 & 48 Travel Motors If you're the guy turning wrenches on Hitachi excavators, you know the HMGC series travel motors take an absolute beating on the job site. Whether it's mud, rocks, or steep slopes, these drives work hard. When they finally wear out and start losing power on a grade, pulling to one side, or making a nasty grinding noise, the machine is dead in the water. Going to the dealer for a brand-new OEM motor will cost your customer a small fortune, and they can't afford the downtime. We put this core rebuild kit together for the shops that want to fix the problem at the source. This set gives you the exact internal rotating group components you need to restore the motor: the Cylinder Block, Valve Plate, 7 heavy-duty Pistons, the Drive Shaft, and the Center Pin. We included the Drive Shaft and Center Pin here for a reason. When these travel motors hit high hours, the splines on the shaft often wear down, and the center pin gets fatigued. If you put a new rotating group in but leave the old shaft, the motor will vibrate and destroy itself. A lot of cheap aftermarket kits skip these parts to lower the price, leaving you stuck halfway through the rebuild. We give you a truly complete set straight out of the box. We know bad tolerances will ruin a travel motor. If the valve plate or pistons don't fit perfectly, the motor will overheat and fail under the extreme pressure of moving heavy equipment. Every piece here is precision-machined for a true 1:1 fit to original specs, and the materials are heat-treated to survive the toughest conditions. Are you a parts distributor looking to build your own brand? We fully support OEM/ODM customization. Laser-mark your logo on the metal parts, use custom packaging, and offer your clients a reliable alternative they can trust. Have an HMGC travel motor core sitting on your workbench right now? Drop us a quick message with your exact model, and we’ll get a fast quote and shipping details over to you today.
Send Inquiry
Product Introduction

Wuhan Xinlaifu Hydraulic Equipment Co., Ltd. is one of the leading manufacturers and suppliers of hitachi hmgc hydraulic travel motor hmgc16/32/48 travel parts for repair maintain in China. With abundant experience, we warmly welcome you to buy high quality customized products at competitive price from our factory. Also, OEM&ODM service is available.

 

NO DESCRIPTION QTY/SET
1 CYLINDER BLOCK 1
2 VALVE PLATE 1
3 PISTON 7
4 DRIVE SHAFT 1
5 CENTER PIN 1

 

product-2730-1536

Hitachi HMGC16 / HMGC32 / HMGC48 Travel Motor - Technical Specifications

Motor Series Unit Type Function Typical Class
HMGC16, HMGC32, HMGC48 7-piston axial piston travel motor Track drive through final drive Small to mid-size excavators

The travel motor in this Hitachi HMGC series is an axial piston unit that drives the track through the final drive, supplying forward and reverse travel torque. The rotating group combines a cylinder block, valve plate and seven pistons, with a geared drive shaft and a center pin locating the group.

We supply complete travel motors and individual replacement parts. The internal repair kit contains 5 core components: 1 cylinder block, 1 valve plate, 7 pistons, 1 drive shaft and 1 center pin.

Each component is manufactured to OEM specifications. Cylinder block bores are precision-honed, the valve plate is lapped for a tight sealing surface, pistons are heat-treated for wear resistance, and the drive shaft and center pin are machined to original tolerances with matched splines and bores. Parts are inspected before shipment and available for fast global dispatch, with custom OEM/ODM packaging and private-label support.

Part reference: HMGC16 / HMGC32 / HMGC48 Travel Motor Kit

Part Name HMGC16 TRAVEL HMGC32 TRAVEL HMGC48 TRAVEL
Cylinder Block HMGC16 Travel Cylinder Block HMGC32 Travel Cylinder Block HMGC48 Travel Cylinder Block
Valve Plate HMGC16 Travel Valve Plate HMGC32 Travel Valve Plate HMGC48 Travel Valve Plate
Piston HMGC16 Travel Piston HMGC32 Travel Piston HMGC48 Travel Piston
Drive Shaft HMGC16 Travel Drive Shaft HMGC32 Travel Drive Shaft HMGC48 Travel Drive Shaft
Center Pin HMGC16 Travel Center Pin HMGC32 Travel Center Pin HMGC48 Travel Center Pin

 

product-2730-1536

An HMGC16/32/48 Travel Motor That Was Dragging One Track

This one came in on a smaller Hitachi, an HMGC16, HMGC32 or HMGC48 travel motor. The machine pulled to one side and walked slow under load, but the track wasn't jammed, so I didn't treat it as a dead motor. On these compact axial piston travel units the housing usually stays intact; what drops off is the internal seal in the rotating group.

I opened on the pressure side. Block and plate came off together, and I laid both faces flat and traced the marks under the light. The worn face had scratches running one way instead of sitting evenly, and the seven pistons in the bores showed that same edge rub. The center pin locates the group; I turned it between my fingers to feel for a tight spot or score, and it still moved cleanly, so it stayed.

The drive shaft carries the geared output. I rolled it to check the splines and teeth for wear or bruising, and on this one the teeth held up, so the shaft went back in. I don't pull a part just because the motor came apart; what still measures where it should stays, and I change only what the bores and faces show worn.

The block, plate and pistons wear at different rates, so I read that uneven wear first and match the repair to it, instead of swapping the whole motor by habit.

Other makes build their compact excavator travel drives around the same axial piston layout - Rexroth, Sauer, Komatsu, Hitachi, CAT, Kawasaki, Linde, Eaton Vickers, Parker, Nachi, Uchida, Yuken, Liebherr, Toshiba, Kayaba, Oilgear, Denison, plus Doosan, Volvo, Hyundai, Foton and Kato - but each motor has to be checked against its own wear.

 

FAQ

WUHAN XIN LAI FU HYDRAULIC PNEUMATIC EQUIPMENT CO.LTD

Q: Is there a customization option available? For example, OEM/ODM?

A: Yes, We can provide customized services.

Q: Can you make my own brand on the products?

A: Of course we can.

Q: How to obtain a detailed quotation?

A: Mobile,Whatsapp,Wechat: +86-18995500394
Mail :kate_bao@rexroth-hyd.com

Q: What is the MOQ?

A: Determine MOQ based on your product, standard product: MOQ 1pc, non-standard: 10-500pcs

Q: What payment methods are supported?

A: TT/PayPal/Western Union/Credit Card/Bank Transfer

Q: What is your payment terms?

A: Sample order,full payment in advance;full order,30% /50% deposit and the balance before shipment.

Q: How long is the delivery time?

A: Spot products are expected to take 2-3 working days, while futures products are determined based on the delivery time.

Q: How long does the warranty ?

A: Warranty 12 months

Q: Does your company have ISO certification?

A: Yes , we have

Q: Can you provide samples?

A: Yes , we can supply sample ,but not free .

Q: Contact with me pls if you have other questions!

A: I am waiting for your good news!

Q: Best regards,

A: Kate bao

Q: Mobile,Whatsapp,Wechat: +86-18995500394

A: Mail :kate_bao@rexroth-hyd.com

 

product-823-118

 

 

 

 

 

Hot Tags: hitachi hmgc hydraulic travel motor hmgc16/32/48 travel parts for repair maintain, China hitachi hmgc hydraulic travel motor hmgc16/32/48 travel parts for repair maintain manufacturers, suppliers

Send Inquiry

whatsapp

Phone

E-mail

Inquiry