Hitachi AP5S 53/67(EX100/120-2/3/5)SWING Motor Parts For Repair Maintain
Wuhan Xinlaifu Hydraulic Equipment Co., Ltd. is one of the leading manufacturers and suppliers of hitachi ap5s 53/67(ex100/120-2/3/5)swing motor parts for repair maintain in China. With abundant experience, we warmly welcome you to buy high quality customized products at competitive price from our factory. Also, OEM&ODM service is available.
| NO | DESCRIPTION | QTY/SET |
|---|---|---|
| 1 | CYLINDER BLOCK | 1 |
| 2 | VALVE PLATE | 1 |
| 3 | RETAINER PLATE | 1 |
| 4 | SHOE PLATE | 1 |
| 5 | PISTON | 9 |
| 6 | DRIVE SHAFT | 1 |
| 7 | BALL GUIDE | 1 |
| 8 | SPACER | 2 |
| 9 | WAVE SPRING | 4 |

Hitachi AP5S 53/67 Swing Motor - Technical Specifications
| Motor Series | Machine Models | Unit Type | Function | Typical Class |
|---|---|---|---|---|
| AP5S 53, AP5S 67 | EX100/120-2, EX100/120-3, EX100/120-5 | 9-piston axial piston swing motor | Upperstructure rotation through swing gear | Small to mid-size excavators |
| Part Name | EX100-2 SWING | EX100-3 SWING | EX100-5 SWING |
|---|---|---|---|
| Cylinder Block | EX100-2 Swing Cylinder Block | EX100-3 Swing Cylinder Block | EX100-5 Swing Cylinder Block |
| Valve Plate | EX100-2 Swing Valve Plate | EX100-3 Swing Valve Plate | EX100-5 Swing Valve Plate |
| Retainer Plate | EX100-2 Swing Retainer Plate | EX100-3 Swing Retainer Plate | EX100-5 Swing Retainer Plate |
| Shoe Plate | EX100-2 Swing Shoe Plate | EX100-3 Swing Shoe Plate | EX100-5 Swing Shoe Plate |
| Piston | EX100-2 Swing Piston | EX100-3 Swing Piston | EX100-5 Swing Piston |
| Drive Shaft | EX100-2 Swing Drive Shaft | EX100-3 Swing Drive Shaft | EX100-5 Swing Drive Shaft |
| Ball Guide | EX100-2 Swing Ball Guide | EX100-3 Swing Ball Guide | EX100-5 Swing Ball Guide |
| Spacer | EX100-2 Swing Spacer | EX100-3 Swing Spacer | EX100-5 Swing Spacer |
| Wave Spring | EX100-2 Swing Wave Spring | EX100-3 Swing Wave Spring | EX100-5 Swing Wave Spring |
| Part Name | EX120-2 SWING | EX120-3 SWING | EX120-5 SWING |
|---|---|---|---|
| Cylinder Block | EX120-2 Swing Cylinder Block | EX120-3 Swing Cylinder Block | EX120-5 Swing Cylinder Block |
| Valve Plate | EX120-2 Swing Valve Plate | EX120-3 Swing Valve Plate | EX120-5 Swing Valve Plate |
| Retainer Plate | EX120-2 Swing Retainer Plate | EX120-3 Swing Retainer Plate | EX120-5 Swing Retainer Plate |
| Shoe Plate | EX120-2 Swing Shoe Plate | EX120-3 Swing Shoe Plate | EX120-5 Swing Shoe Plate |
| Piston | EX120-2 Swing Piston | EX120-3 Swing Piston | EX120-5 Swing Piston |
| Drive Shaft | EX120-2 Swing Drive Shaft | EX120-3 Swing Drive Shaft | EX120-5 Swing Drive Shaft |
| Ball Guide | EX120-2 Swing Ball Guide | EX120-3 Swing Ball Guide | EX120-5 Swing Ball Guide |
| Spacer | EX120-2 Swing Spacer | EX120-3 Swing Spacer | EX120-5 Swing Spacer |
| Wave Spring | EX120-2 Swing Wave Spring | EX120-3 Swing Wave Spring | EX120-5 Swing Wave Spring |
The swing motor in this Hitachi AP5S series is an axial piston unit that rotates the upperstructure through the swing gear. The rotating group combines a cylinder block, valve plate, retainer plate, shoe plate and nine pistons, with a drive shaft, ball guide, two spacers and four wave springs.
We supply complete swing motors and individual replacement parts. The internal repair kit contains the listed core components: 1 cylinder block, 1 valve plate, 1 retainer plate, 1 shoe plate, 9 pistons, 1 drive shaft, 1 ball guide, 2 spacers and 4 wave springs.
Each component is manufactured to OEM specifications. Cylinder block bores are precision-honed, the valve plate is lapped for a tight sealing surface, pistons are heat-treated for wear resistance, the drive shaft and ball guide are machined to original tolerances, and the spacers and wave springs are matched to original fit and preload. Parts are inspected before shipment and available for fast global dispatch, with custom OEM/ODM packaging and private-label support.
Part reference: AP5S 53/67 (EX100/120-2/3/5) Swing Motor Kit

An AP5S 53/67 Swing Motor on an EX100/120 That Drifted on the Turn
This swing motor came in off an older Hitachi, the AP5S 53 or 67 used across the EX100/120-2/3/5 machines. The upperstructure turned slow and weak, and it drifted a little when it should have held. It wasn't seized, so I didn't write it off from outside. On these small-to-mid axial piston swing units the housing usually stays intact; the loss of swing pressure shows up inside the rotating group.
I opened on the pressure side. Block and plate came off together, and I laid both faces flat to read the contact marks under the light - scratches running one way instead of sitting evenly tell me where the seal has gone. The nine pistons in the bores showed the same edge rub, one side heavier than the other. The retainer and shoe plate hold the set in place, and the ball guide keeps it seated; none had shifted on this machine, so they went back.
The drive shaft carries the geared output. I rolled it to check the splines and teeth for wear or bruising, and it held up. The spacers set the internal clearance and the wave springs keep the preload; I checked the springs for sag or a broken coil, and they still had tension, so those stayed.
I keep what still measures where it should. The block, plate and pistons don't wear together, so I read that uneven wear first and change only what the bores and faces actually show, instead of swapping the whole swing motor on habit.
Other makes build their small-to-mid excavator swing drives around the same axial piston layout - Rexroth, Sauer, Komatsu, Hitachi, CAT, Kawasaki, Linde, Eaton Vickers, Parker, Nachi, Uchida, Yuken, Liebherr, Toshiba, Kayaba, Oilgear, Denison, plus Doosan, Volvo, Hyundai, Foton and Kato - but each motor has to be judged on its own wear.
FAQ
WUHAN XIN LAI FU HYDRAULIC PNEUMATIC EQUIPMENT CO.LTD
Q: Is there a customization option available? For example, OEM/ODM?
A: Yes, We can provide customized services.
Q: Can you make my own brand on the products?
A: Of course we can.
Q: How to obtain a detailed quotation?
A: Mobile,Whatsapp,Wechat: +86-18995500394
Mail :kate_bao@rexroth-hyd.com
Q: What is the MOQ?
A: Determine MOQ based on your product, standard product: MOQ 1pc, non-standard: 10-500pcs
Q: What payment methods are supported?
A: TT/PayPal/Western Union/Credit Card/Bank Transfer
Q: What is your payment terms?
A: Sample order,full payment in advance;full order,30% /50% deposit and the balance before shipment.
Q: How long is the delivery time?
A: Spot products are expected to take 2-3 working days, while futures products are determined based on the delivery time.
Q: How long does the warranty ?
A: Warranty 12 months
Q: Does your company have ISO certification?
A: Yes , we have
Q: Can you provide samples?
A: Yes , we can supply sample ,but not free .
Q: Contact with me pls if you have other questions!
A: I am waiting for your good news!
Q: Best regards,
A: Kate bao
Q: Mobile,Whatsapp,Wechat: +86-18995500394
A: Mail :kate_bao@rexroth-hyd.com

Hot Tags: hitachi ap5s 53/67(ex100/120-2/3/5)swing motor parts for repair maintain, China hitachi ap5s 53/67(ex100/120-2/3/5)swing motor parts for repair maintain manufacturers, suppliers
Previous
No InformationNext
No InformationYou Might Also Like
Send Inquiry












