KOMATSU PC Series Plunger Pump PC200-6 PC200-7 PC220-7/8 PC300-7PC300-8 PC400-7 SWING Spare Parts For Repair Maintain
video

KOMATSU PC Series Plunger Pump PC200-6 PC200-7 PC220-7/8 PC300-7PC300-8 PC400-7 SWING Spare Parts For Repair Maintain

Complete Rebuild Kit for Komatsu Swing Motors (PC200 to PC400 Series) If you're turning wrenches on Komatsu excavators, you know the swing motor is always taking a beating. Whether it's a 20-ton PC200-6 or a big PC400-7, when that swing motor starts getting weak, jerky, or won't hold the machine on a slope, the whole job site grinds to a halt. Going to the dealer for a brand-new OEM unit is going to cost your customer a fortune, and they can't afford the downtime. We put this complete internal rebuild kit together for the shops that want to fix it right the first time. This set covers a massive range of classic Komatsu machines, from the PC200-6, PC200-7, and PC220-7/8, all the way up to the PC300-7/8 and PC400-7. Inside the box, you get the exact components that wear out: the Cylinder Block, Valve Plate, 7 Pistons, Retainer Plate, Center Pin, and the Drive Shaft. We included the Center Pin and Drive Shaft for a reason. When these motors hit high hours, the splines and the center pin often wear down. A lot of cheap kits out there skip them to save a few bucks, leaving you stuck halfway through the rebuild hunting for parts. We give you everything straight out of the box. We know bad tolerances will ruin a job. If the valve plate or pistons don't fit perfectly, the motor will whine and fail again under load. We don't cut corners. Every piece is precision-machined for a true 1:1 fit to original specs, and the materials are heat-treated to handle the constant starting and stopping of heavy digging. Are you a distributor looking to build your own brand? We fully support OEM/ODM customization. Laser-mark your logo on the metal parts, use custom packaging, and offer your clients a reliable alternative they can trust. Have a swing motor core sitting on your bench right now? Send us a quick message with your exact model, and we’ll get a fast quote and shipping details over to you today.
Send Inquiry
Product Introduction

Wuhan Xinlaifu Hydraulic Equipment Co., Ltd. is one of the leading manufacturers and suppliers of komatsu pc series plunger pump pc200-6 pc200-7 pc220-7/8 pc300-7pc300-8 pc400-7 swing spare parts for repair maintain in China. With abundant experience, we warmly welcome you to buy high quality customized products at competitive price from our factory. Also, OEM&ODM service is available.

 

NO DESCRIPTION QTY/SET
1 CYLINDER BLOCK 1
2 VALVE PLATE 1
3 PISTON 7
4 RETAINER PLATE 1
5 CENTER PIN 1
6 DRIVE SHAFT 1

 

product-2730-1536

Komatsu PC Series Swing Motor - Technical Specifications

Machine Models Unit Type Function Typical Class
PC200-6, PC200-7, PC220-7/8, PC300-7, PC300-8, PC400-7 Axial piston swing motor Upperstructure rotation drive 20–40 ton excavators

 

Part Name PC200-6 SWING PC200-7 SWING PC220-7/8 SWING PC300-7 SWING PC300-8 SWING PC400-7 SWING
Cylinder Block PC200-6 Swing Cylinder Block PC200-7 Swing Cylinder Block PC220-7/8 Swing Cylinder Block PC300-7 Swing Cylinder Block PC300-8 Swing Cylinder Block PC400-7 Swing Cylinder Block
Valve Plate PC200-6 Swing Valve Plate PC200-7 Swing Valve Plate PC220-7/8 Swing Valve Plate PC300-7 Swing Valve Plate PC300-8 Swing Valve Plate PC400-7 Swing Valve Plate
Piston PC200-6 Swing Piston PC200-7 Swing Piston PC220-7/8 Swing Piston PC300-7 Swing Piston PC300-8 Swing Piston PC400-7 Swing Piston
Retainer Plate PC200-6 Swing Retainer Plate PC200-7 Swing Retainer Plate PC220-7/8 Swing Retainer Plate PC300-7 Swing Retainer Plate PC300-8 Swing Retainer Plate PC400-7 Swing Retainer Plate
Center Pin PC200-6 Swing Center Pin PC200-7 Swing Center Pin PC220-7/8 Swing Center Pin PC300-7 Swing Center Pin PC300-8 Swing Center Pin PC400-7 Swing Center Pin
Drive Shaft PC200-6 Swing Drive Shaft PC200-7 Swing Drive Shaft PC220-7/8 Swing Drive Shaft PC300-7 Swing Drive Shaft PC300-8 Swing Drive Shaft PC400-7 Swing Drive Shaft

 

The swing motors on these Komatsu PC machines are axial piston units that drive the upperstructure through the rotation gearbox, supplying turning torque and holding the house over the track base. The same internal rotating group layout covers the listed 20- to 40-ton models.

We supply complete swing motors and individual replacement parts. The internal repair kit contains 6 core components: cylinder block, valve plate, 7 pistons, retainer plate, center pin and drive shaft.

Each component is manufactured to OEM specifications. Cylinder block bores are precision-honed, the valve plate is lapped for a tight sealing surface, pistons are heat-treated for wear resistance, the center pin and drive shaft are machined to original tolerances, and the retainer plate is matched to original fit. Parts are inspected before shipment and available for fast global dispatch, with custom OEM/ODM packaging and private-label support.

Part reference: PC200-6 / PC200-7 / PC220-7-8 / PC300-7 / PC300-8 / PC400-7 Swing Motor Kit

product-2730-1536

Swing Motors Across the PC200 to PC400 Range

The swing motor on these Komatsu machines - PC200-6, PC200-7, PC220-7/8, PC300-7, PC300-8 and PC400-7 - turns the upperstructure through the rotation gearbox. The motor itself sees heavy side loads and long duty cycles, but the outer housing usually survives; the trouble shows up inside the rotating group.

When a swing comes on slow, creeps after the lever is released, or loses holding torque, I open the block and valve plate first. Looking over both surfaces, I check where a face has gone rough or out of flat rather than chasing one obvious break. The seven pistons in those bores follow the same wear, often one edge rubbed harder than the other. The retainer plate behind them keeps the set seated, and the center pin locates the group; if the pin has shifted, it shows in how the pistons line up, so I check it while everything's apart.

The drive shaft carries the output into the gearbox. A whine that tracks swing speed points to the shaft before the piston group does.

I don't swap the whole motor on habit. On these, block, plate and pistons wear at different rates, so I replace what the bores, face and shaft actually show and keep what still measures in tolerance.

 

FAQ

WUHAN XIN LAI FU HYDRAULIC PNEUMATIC EQUIPMENT CO.LTD

Q: Is there a customization option available? For example, OEM/ODM?

A: Yes, We can provide customized services.

Q: Can you make my own brand on the products?

A: Of course we can.

Q: How to obtain a detailed quotation?

A: Mobile,Whatsapp,Wechat: +86-18995500394
Mail :kate_bao@rexroth-hyd.com

Q: What is the MOQ?

A: Determine MOQ based on your product, standard product: MOQ 1pc, non-standard: 10-500pcs

Q: What payment methods are supported?

A: TT/PayPal/Western Union/Credit Card/Bank Transfer

Q: What is your payment terms?

A: Sample order,full payment in advance;full order,30% /50% deposit and the balance before shipment.

Q: How long is the delivery time?

A: Spot products are expected to take 2-3 working days, while futures products are determined based on the delivery time.

Q: How long does the warranty ?

A: Warranty 12 months

Q: Does your company have ISO certification?

A: Yes , we have

Q: Can you provide samples?

A: Yes , we can supply sample ,but not free .

Contact with me pls if you have other questions!

I am waiting for your good news!

Best regards,

Kate bao

Mobile,Whatsapp,Wechat: +86-18995500394

Mail :kate_bao@rexroth-hyd.com

 

product-823-118

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: komatsu pc series plunger pump pc200-6 pc200-7 pc220-7/8 pc300-7pc300-8 pc400-7 swing spare parts for repair maintain, China komatsu pc series plunger pump pc200-6 pc200-7 pc220-7/8 pc300-7pc300-8 pc400-7 swing spare parts for repair maintain manufacturers, suppliers, 6 inch hydraulic pump, bi directional hydraulic pump, cat vq series, Eaton Vickers ADU 420 Series Of Hydraulic Mobile Axial Mobile Hydraulic Power Pack Spare, hydraulic fertilizer pump, Vickers ADU 420 hydraulic spare

Send Inquiry

whatsapp

Phone

E-mail

Inquiry