| Material: | |
|---|---|
| Pressure: | |
| Model: | |
| Product name: | |
| Pump Type: | |
| Theory: | |
| Power: | |
| Quantity: | |
Pgp505
Emanway
0079
Construction: The pumps feature a three-piece construction for ease of distribution and maintenance.
Material: Made with aluminum pumping sections, which contribute to their lightweight design.
Longevity: Equipped with journal bushings that ensure a long service life.
Efficiency: Pressure-balanced thrust blocks help maintain high efficiency.
Variety: Multiple sections are available to meet different flow requirements.
Pressure and Speed: Capable of operating pressures up to 275 bar (3,988 psi) and speeds up to 4,000 rpm.
Rotation: Available in clockwise (CW), counter-clockwise (CCW), and bi-rotational configurations.
Customization: SAE shafts, flanges, and porting options allow for customization to fit specific application needs.
Valve Options: A wide range of integrated valve options are available, including pressure relief, anti-cavitation, cross port relief, solenoid unloading, proportional relief, and reversing.
PGP series hydraulic gear pump PGM series motor
6. For excavator, garder and bulldozer and self-unloading vehicles etc.
|
1
|
Retaining ring
|
8
|
case seal
|
|
2
|
shaft seal ring
|
9
|
pump case
|
|
3
|
front cover
|
10
|
bearing
|
|
4
|
slide bearing
|
11
|
axial zone seal
|
|
5
|
centering pin
|
12
|
support
|
|
6
|
gear(driven)
|
13
|
end cover
|
|
7
|
gear(drive)
|
14
|
fixing screws
|
When replace new pump , it requirements fill up with hydraulic oil inlet position , and turn a half circle direction to pump
rotation . The gear pump inspection shall be done in this side. After installing, check if the connecting head , seal oring , leak oil , leak out of this pipe . Within 20 mins keeping low speed operation when start up machine ; Be assurance pump inlet tube and flange withou air . The machihe will not be operation and burn shaft if pressure insufficient .
Construction: The pumps feature a three-piece construction for ease of distribution and maintenance.
Material: Made with aluminum pumping sections, which contribute to their lightweight design.
Longevity: Equipped with journal bushings that ensure a long service life.
Efficiency: Pressure-balanced thrust blocks help maintain high efficiency.
Variety: Multiple sections are available to meet different flow requirements.
Pressure and Speed: Capable of operating pressures up to 275 bar (3,988 psi) and speeds up to 4,000 rpm.
Rotation: Available in clockwise (CW), counter-clockwise (CCW), and bi-rotational configurations.
Customization: SAE shafts, flanges, and porting options allow for customization to fit specific application needs.
Valve Options: A wide range of integrated valve options are available, including pressure relief, anti-cavitation, cross port relief, solenoid unloading, proportional relief, and reversing.
PGP series hydraulic gear pump PGM series motor
6. For excavator, garder and bulldozer and self-unloading vehicles etc.
|
1
|
Retaining ring
|
8
|
case seal
|
|
2
|
shaft seal ring
|
9
|
pump case
|
|
3
|
front cover
|
10
|
bearing
|
|
4
|
slide bearing
|
11
|
axial zone seal
|
|
5
|
centering pin
|
12
|
support
|
|
6
|
gear(driven)
|
13
|
end cover
|
|
7
|
gear(drive)
|
14
|
fixing screws
|
When replace new pump , it requirements fill up with hydraulic oil inlet position , and turn a half circle direction to pump
rotation . The gear pump inspection shall be done in this side. After installing, check if the connecting head , seal oring , leak oil , leak out of this pipe . Within 20 mins keeping low speed operation when start up machine ; Be assurance pump inlet tube and flange withou air . The machihe will not be operation and burn shaft if pressure insufficient .
