OEM Axial Piston Variable pump of A10VNO 52 and 53 series A10VNO85DRS/53L+A10VNO28DRS/53L plunger hydraulic pumps

plunger pump A10VNO axial variable pump

1. Axial plunger unit: swash plate design, stepless variable, rated pressure 210bar, peak pressure 250bar.

2. Working mode: pump, open circuit.

3. Displacement specifications: The entire series has four specifications: 28cc/r, 45cc/r, 63cc/r, and 85cc/r.

4. Control method; There are two methods: pressure control and pressure flow control.

5. Series: The specifications for displacement 28, 45, and 63 are 52 series, and the displacement 85 is 53 series.

6. Rotation direction: There are two types of rotation directions, clockwise and counterclockwise (viewed from the shaft section).

7. Sealing: The sealing material of the entire series of products is FKM fluororubber.

8. Shaft extension: A1OVNO variable displacement pump shaft extension follows SAE J744 standard.

9. Installation flange: A10VNO variable displacement pump installation flange follows SAE 2-hole standard